👉Black Tea manufacture:
Withering: The objective of withering is to reduce the moisture in the t ealeaf by up to 70% (varies from region to region). Tea is laid out on a wire mesh in troughs. Air is then passed through the tea removing the moisture in a uniform way. This process takes around 12 to 17 hours. At the end of this time the leaf is limp and pliable and so will roll well.
Rolling: Tea is placed into a rolling machine, which rotates horizontally on the rolling table. This action creates the twisted wiry looking tealeaves. During the rolling process the leaves are also broken open, which starts the third process - oxidisation.
Oxidisation: Once rolling is complete, the tea is either put into troughs or laid out on tables whereby the enzymes inside the tealeaf come in to contact with the air and start to oxidise. This creates the flavour, colour and strength of the tea. It is during this process that the tealeaf changes from green, through light brown, to a deep brown, and happens at about 26 degrees centigrade. This stage is critical to the final flavour of the tea, if left too long the flavour will be spoilt. Oxidisation takes from between half an hour to 2 hours. This process is monitored constantly with the use of a thermometer along with years of experience. The tea then passes to the final stage of drying. Drying: To stop the oxidising process the tea is passed through hot air dryers. This reduces the total moisture content down to about 3%. The oxidisation will be stopped by this process, and now the dried tea is ready to be sorted into grades before packing.
👉Green Tea manufacture: The main difference when making green tea is that the oxidisation process is omitted, which allows the tea to remain green in colour, and very delicate in flavour. In order to ensure that the freshly picked leaf does not oxidise, before the tea is rolled, the leaf is either pan fried, or steamed. This will prevent the interaction of the enzymes in the leaf, and so no oxidisation can take place. In China some green teas are withered before being pan fried, but more usually in green tea manufacture, the withering process is omitted as well. Rolling, drying, and sorting follow.
👉👉Tasting and Blending Processing and grading are exhaustive, and vitally important to teas manufacture. The teas are not necessarily ready to be packaged and sold, and this is where the skills of the tea blender enter the picture. At Twinings’ Head Office in England, our expert blenders select teas from thousands of different tea estates and yet still arrive at the exact flavour for a particular blend. No two batches of tea are ever alike, even if they come from the same garden, which makes the art of blending extremely complex. Weather, altitude, moisture and soil each contribute to tea characteristics; tea changes according to its season, and even to the time of day at which it is picked. To produce the same, optimum blend every time, the importance of the blender’s art is inestimable. At Twinings a tea taster and blender will train for five years, before they are fully qualified, although they are constantly learning and developing their skills. Small samples of tea are first obtained from tea brokers and tasted for quality, flavour as well as being assessed for colour. Duly approved, the teas are then purchased from markets around the world. Professional tasters will now select teas to produce the desired blend. Each sample blend is brewed, and undergoes a methodical tasting procedure. Freshly drawn water is boiled in a copper kettle and poured over five grammes of tea in a special white, lidded ceramic cup. The leaves are infused for precisely six minutes, after which the “liquor” is poured off into a bowl ready for tasting. Tasters examine both dry and wet leaves, judging the brew’s colour and clarity. Then using special spoons, tasters suck the tea sharply against their palates and expel it into spittoons. So well seasoned are tasters’ palates that they can detect the slightest variation on the standard they seek. The taster's job however has not finished, as the tea still needs to be tasted after blending, and during the packing stage. Only when this has been approved, will the tea be ready for distribution to Twinings’ many retail outlets throughout the world, and of course to consumer’s teapots.
👉👉Sorting and Packaging Sorting, or grading, is the final stage in the tea process and one of the most crucial. Here leaves are sifted into different sizes, then classified according to appearance and type. When sufficient amount of each grade has been sorted, it is then packed. This is either packed into foil lined paper sacks, which provide a moisture barrier, keeping the tea dry. Tea chests, however, are used for larger leaf teas as they provide an extra degree of protection against the leaves being damaged.
Comments
Post a Comment